KUPER EFS 2800 Veneer Guillotine
Single-knife veneer guillotine for rapid and precise cutting of stacks of material
Introducing the KUPER EFS 2800
The cost-effective and customisable solution that is intuitive and safe to use, making high-quality veneers possibleClean, tear-free and parallel cutting edges are the basis for a good joint. The KUPER EFS 2800 ensures the highest cutting quality due to its swinging knife motions cutting at an angle of 20 degrees. Cutting veneer transverse to the fiber direction can also be easily performed.
The narrow design of the KUPER EFS 2800 ensures the perfect view of the material and cutting surface every time. The cutting line is indicated by a guide light, guaranteeing an ultraprecise cut. Brake motor, gear drive and crank drive ensure rapid and powerful knife motion.
The width dimensions are approached automatically by the integrated positioning control. The pressure bar is lowered and as soon as the target pressure is reached, the cut is triggered. An angular set-up is recommended combined with the KUPER QFS cross cutting clipper. The support table with rip fence provides sufficient surface for comfortable handling even for very wide materials.
£POA + VAT
KUPER EFS 2800 Veneer Guillotine Base Specification
The Single Knife Veneer Guillotine KUPER EFS 2800 cuts of highest quality thanks to the swinging and powerful drawing motion of the knife. Additional advantages of this machine include:
-
Parallel fence with high-speed motordriven positioning, fine adjustment and digital gauge for cutting parallel face veneers and edge lippings.
-
Clearly visible marking of the cutting line by means of a green guide light.
-
Guide markings and an angular fence on the machine table for easier alignment of the material.
-
Broad pressure bar for pressing even wavy veneer materials and level prior to cutting.
-
Pre-cut facility with hydraulic adjustment of the cutter bar by 0.9 mm. Precutting and finish-cutting of the pressed material produces right-angled cut faces.
-
Powerful crank drive enables the cutting of veneer across the grain.
-
High pressing and cutting forces are reliably absorbed by the heavy-duty construction.
-
Precise and permanent parallel guidance of machine components.
-
Knife with 30 mm grinding allowance for longest possible use.
-
Intermittent operation of the drives results in a low energy requirement and a low level of noise.
-
Occupational safety regulations are met by a light barrier safety device, two-hand operation, electric safety control system and protective gratings at the rear.
KUPER Servicing
KUPER machines are only as good as their preparation. Our in-house team of trained engineers are on-hand to visit your workshop and provide you with scheduled KUPER servicing, ensuring that your machines are optimised for maximum performance and continue to meet safety standards.
R&J Machinery is proud to be the main UK agent for KUPER
R&J Machinery has a long relationship with KUPER, and we are proud to be the main UK agents and importers for their machines and spare parts. We are one of the top-tier suppliers of KUPER veneering machines across Europe, and our team of service and repair engineers travels to KUPER in Germany for training on the latest machinery developments.
You can be sure that our team are fully qualified to offer you guidance on the ideal KUPER veneering setup for your needs, and are fully qualified to service and maintain your existing machines to the highest standard. We look forward to talking to you soon about all things KUPER!
For sales, servicing, parts, advice and support, please call our office team on 01455 840224.
Like the KUPER EFS 2800 Veneer Guillotine? Book a Demo!
Test-drive our machinery in our 16,000 sq ft facilityOur machines are ready for your inspection and testing at short notice in a purpose-built environment. Why not visit us at our location in Leicestershire to compare and contrast similar machines, and have our experts show you the key differences between models and brands?
Request KUPER Servicing Information
R&J Machinery's in-house team of trained engineers are on-hand to visit your workshop and provide you with scheduled KUPER servicing. To request more information about the servicing packages we offer, please speak to our knowledgeable team on 01455 840224 or complete this enquiry form.